Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Option A: Wall Mount

  1. At the installation location on the wall, use the mounting bracket to mark four holes for the wall plugs and screws (included in the screw kit).


  2. Drill four holes for the wall plugs, and then insert the plugs and tap them flush with the wall surface.


Note: Drill 2.5 mm (±0.2 mm) holes for M5 self-tapping screws, or 4.5 mm (±0.2 mm) holes for nylon wall plugs

Last updated